Skip to main content
Fig. 6 | Microplastics and Nanoplastics

Fig. 6

From: Measuring impacts of microplastic treatments via image recognition on immobilised particles below 100 μm

Fig. 6

Relative changes on particle numbers and mean particle area as obtained from the image analysis and subsequent GLM correction. Changes are shown in percent of the matched values to pre-treatment values. Significant changes that exceed the 95% prediction interval of the negative controls are marked by an asterisk. White tiles indicate data not being available for different reasons (for details see Methodological caveats. Uncorrected values and underlying per-particle data can be viewed in the interactive version of this fig [52].

Back to article page